Make sure that the vacuum cleaner is switched off and isn’t charging before you start the emptying process.. As we mentioned in the introduction, the Gtech AirRam Mk2 has a detachable dust canister that’s located in the floorhead.. To remove the bin, you simply need to use the handle on the top of the floorhead to pull it away from the rest of the vacuum.

A quarter teaspoon of washing up liquid added to around 250ml of plain water is plenty.You should also give the floor a quick vacuum before you start to get rid of loose dirt.. Once you’ve made the solution, add a small amount to a clean, white cloth and start using it to gently work the affected carpet fibres.

Start from the outside and work inwards to prevent the stain from spreading further.We don’t recommend spraying the mixture on the carpet directly, as you don’t want to oversaturate it..When you’ve covered the whole area, let the washing up liquid sit in the carpet for 3-5 minutes, before blotting it up with a different dry cloth (make sure it’s white).

Always blot a carpet rather than rub to prevent damage.. To get rid of any remaining solution and dirt, give the area a rinse with cold water and blot it dry again with a different cloth.Then allow the area to fully air dry before covering it..

Finally, when the patch of carpet is completely dry, give it another vacuum..

You can also use a commercial carpet cleaning product for this method.Colourful fabrics may transfer dyes onto your rug while cleaning, which may cause even more unsightly stains..

Always make sure the carpet is completely dry before vacuuming.. Moisture can damage a vacuum cleaner’s motor.Don’t panic if you’ve spilt tea on your carpet.

The three methods above can help you to remove all but the most stubborn stains, leaving your carpet looking almost as good as new.. We’ve also written a number of other cleaning guides for carpets that you might want to read.How to get red wine out of your carpet.